DeWALT Power-Stud+ SD1 7441SD1 Expansion Wedge Anchor, 3/4 in Dia, 4-3/4 in OAL, 2-1/4 in L Thread, Carbon Steel, Zinc Plated
Description
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
Invoice Description
POWER-STUD+SD1, 3/4INx4-3/4IN W/EXPENSION CLIP, CARBON STEEL, 20/BX, EACH, POWERS WEDGE EXPANSION ANCHOR
Features
Back To Top- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Tech Specs
Back To TopBrand | DeWALT |
---|---|
Diameter | 3/4 in |
Drill Size | 3/4 in |
Finish | Zinc Plated |
Head Type | Threaded Stud |
In Stock | N |
Material | Carbon Steel |
Maximum Work Thickness | 5/8 in |
Minimum Embedment Depth | 3-3/8 in |
Overall Length | 4-3/4 in |
Series | SD1 |
Shear Strength | 12580 lb |
Tensile Strength | 9075 lb |
Thread Length | 2-1/4 in |
Thread Size | 3/4/2010 |
Thread Type | UNC |
Type | Expansion |